Vivo Y19 : PD1934F Kit China Firmware - Flash with SP Flash Tool
Follow these steps to flash the firmware on your Vivo Y19 using SP Flash Tool:
Requirements:
- 🔸 Vivo Y19 Stock Firmware: Download the official firmware for your device from a reliable source.
- 🔸 SP Flash Tool: You can download it from the official SP Flash Tool website.
- 🔸 Vivo Y19 USB Drivers: Ensure that the correct drivers for your phone are installed on your PC.
Steps to Flash Vivo Y19 Firmware with SP Flash Tool:
- Install SP Flash Tool and Drivers:
- Download and extract the SP Flash Tool to a folder on your computer.
- Install the necessary USB drivers for your Vivo Y19.
- Download the Vivo Y19 Firmware:
- Make sure you have the official firmware for your Vivo Y19 in .zip format.
- Extract the firmware to a folder. You should have a .scatter file and several other files like boot.img, system.img, etc.
- Launch SP Flash Tool:
- Run the flash_tool.exe file from the SP Flash Tool folder.
- Load the Scatter File:
- In SP Flash Tool, click on the "Choose" button under the "Scatter-loading File" section.
- Navigate to the folder where you extracted the firmware and select the scatter.txt file. This file tells the tool how to flash each partition.
- Select Flashing Mode:
- Make sure the flashing mode is set to "Download Only". If you're re-flashing the firmware or need to perform a full flash, you can select "Firmware Upgrade".
- Connect Your Vivo Y19:
- Turn off your Vivo Y19.
- Connect the phone to the PC via USB cable.
- Start the Flashing Process:
- Once everything is set up and your phone is connected, click the "Download" button in SP Flash Tool.
- The tool will begin flashing the firmware to your device.
- You should see a progress bar that will move as the flashing process progresses.
- Wait for the Flashing to Complete:
- Once the flashing is complete, you will see a green checkmark indicating that the process has finished successfully.
- Disconnect your Vivo Y19 from the PC and power it on.
