Requirements:

  • Vivo S1 firmware (Stock ROM)
  • SP Flash Tool
  • USB Drivers for MediaTek devices
  • USB Cable
  • Windows PC

Steps to Flash Vivo S1:

1. Install USB Drivers

Install MediaTek VCOM drivers on your PC to ensure your Vivo device is recognized by the SP Flash Tool.

2. Download Firmware

Get the official Vivo S1 firmware (stock ROM). This is essential for the flashing process.

3. Launch SP Flash Tool

Open SP Flash Tool and load the scatter file from the firmware folder (usually named MTxxxx_Android_scatter.txt).

4. Turn Off Your Vivo S1

Power off your Vivo S1 to prepare it for flashing.

5. Connect Vivo S1 to PC

Connect your Vivo S1 to the PC using the USB cable.

6. Start Flashing

Click on the Download button in SP Flash Tool to begin the flashing process.

7. Wait for Flashing to Complete

Once the flashing process is complete, you will see a green checkmark. Disconnect your device from the PC and reboot it.

Important Warning!

If flashing fails, double-check your connections, USB drivers, and ensure you're using the correct firmware. Try using a different USB cable or port if needed.

Password: vivos1saad

Download Vivo S1 Firmware