Vivo Y71 Global Firmware Tested File
Introduction
If you're looking to flash the global firmware on your Vivo Y71, use the Qualcomm Flash Image Loader (QFIL). Follow the steps below carefully.
Step 1: Install Qualcomm USB Drivers
- Download and install Qualcomm USB drivers on your PC.
- Follow on-screen instructions.
Step 2: Download and Install QFIL Tool
- Download the QFIL tool.
- Extract and run
QFIL.exe.
Step 3: Enable Developer Options
- Go to Settings > About Phone > Tap Build Number 7 times.
- Enable USB Debugging and OEM Unlocking.
Step 4: Boot into EDL Mode
- Power off your device.
- Hold Volume Up + Volume Down and connect to PC.
Step 5: Set Up QFIL Tool
- Open QFIL and select the "Programmer" file.
- Browse and select firmware files.
Step 6: Begin Flashing
- Click Download in QFIL.
- Wait for completion.
Step 7: Reboot the Device
- Your device should reboot automatically.
- If not, reboot manually.
Step 8: Setup the Device
- Complete initial setup.
