Itel A60s (A662LM) Dead Boot Repair PAC File
If your Itel A60s (A662LM) is not turning on or stuck in a dead boot state, you can recover it using the SPD Upgrade Tool with the correct PAC firmware file.
📦 Required Files & Tools:
- Windows PC & USB cable
- SPD (Spreadtrum) USB Drivers
- SPD Upgrade Tool
- Itel A60s (A662LM) PAC Firmware File
🛠 How to Unbrick Itel A60s (A662LM)
- Install SPD Drivers
- Install Spreadtrum USB drivers properly on your PC.
- Reboot your PC after installation for best results. - Open SPD Upgrade Tool
- Extract the tool and runUpgradeDownload.exeas Administrator. - Load PAC Firmware
- Click the gear icon in the tool and select the downloaded PAC file. - Connect Phone in Flash Mode
- Power off the phone completely.
- Connect it to the PC while holding the **Volume Down** or **Volume Up** button. - Start Flashing
- Click Start in the tool.
- Wait until flashing is complete – do not disconnect during the process. - Done! Reboot
- Once finished, the phone will reboot automatically.
- Disconnect and complete the initial setup.
🎉 Successfully Unbricked! ✅
⚠️ Important Tips:
- Ensure PAC file matches your exact model variant.
- Do not interrupt the flashing process once it starts.
- If phone is not detected, try changing the USB cable/port or reinstalling drivers.
