🛠 Tecno Pova 5 Anti-Crack Fix (After Wrong Flashing)
If your Tecno Pova 5 is showing "Anti-Crack" error or is hard-bricked after wrong firmware flashing, this guide provides you the right files and steps to recover it safely using tools like SP Flash Tool or CM2.
🧠 Common Symptoms After Wrong Flash:
- Anti-Crack screen appears after boot
- Phone stuck on logo or not turning on
- Flashing fails in SP Flash Tool with authentication error
- No display or touch issue after flashing
📂 What’s Inside the Fix Package:
- ✅ Signed Preloader (For Tecno Pova 5)
- ✅ Original Firmware Scatter File
- ✅ Secure Boot DA File
- ✅ Compatible with SP Flash Tool or CM2
🔧 Flashing Instructions (SP Flash Tool):
- Install MediaTek USB VCOM Drivers on your PC.
- Extract the fix zip file using WinRAR or 7-Zip.
- Open
flash_tool.exeand load the scatter file from the firmware folder. - Load the
DA File(Download Agent) from the package. - Select Download Only and tick
preloaderonly if the device is dead. - Click “Download” and connect the phone (hold Volume Down while inserting USB).
- Wait for the green success tick – the phone will reboot automatically.
⚠️ Note: Always back up NVRAM and IMEI if possible before flashing. Use trusted flashing tools and drivers for best results.
